ACI Ridge Ventilator is extremely efficient and requires minimum maintenance. This ventilator is perfect for environments such as factories, as it exchanges the air between the inside and the outside, allowing for coolness and fresh air. The unique design blends in perfectly with different buildings and structures; this can be attributed to its simple likeable design.
ACI Ridge Ventilator takes maximum advantage of natural stack action, which is a result of temperature difference between the inside and outside of the factory causing pressure variations resulting in air movement. Heat from plant personnel and also solar heat radiating through the roof and walls warm the inside air which rises and flows out of the building through the ACI Ridge Ventilator.
It is for this reason that the ACI Ridge Ventilator should be mounted on the ridge of a stopping structure or above areas of concentrated heat on flat roofed buildings. The hot air is then replaced by fresh air, which must be allowed to enter the building through openings at its base.
ACI Ridge Ventilator provides continuous natural ventilation with effective weather protection, under normal weather conditions. The vent ridge is designed to effectively remove heat, smoke and fumes on an ongoing basis from factories and industrial buildings.
Installation & Technical Specification
ACI Ridge Ventilator can be fitted to almost rooftop Lengths are available to suit all applications and should be ordered to make the most maximum recommended length is 2200 mm. Consideration should be given to handling and transportation of the material when ordering the required length.